Leica GPS1200+ Technical Reference Manual page 108

Geodetic satellite receiver

Hide thumbs Also See for GPS1200+:

Table of Contents

LED Indicators

Using GPS1200+ without RX1200

The receiver automatically begins to acquire and track satellites and record data

as defined in the receiver configuration.

To shut down the equipment press and hold down the ON/OFF button for 4 s. The

LED indicators will not be lit when the equipment is switched off. Refer to para-

graph "LED Indicators".

Check the stop time.

Note down the stop time.

Every GPS1200+ receiver has three Light Emitting Diode indicators positioned below the

ON/OFF button. They indicate the basic receiver status.

Tracking LED