Lcd_Bklt_Rem Status Codes - Allen-Bradley Micro800 General Instructions Manual

Ladder Diagram (LD)
Structured Text (ST)

LCD_BKLT_REM status codes

Status code Description
0 Enable input is false.
1 Success.
2 Remote LCD not detected.
May occur when:
•
•
3 Connection error.
May occur when there is an internal state machine error. (Possibly caused by
an incompatibility between Controller FW version and RLCD FW version.
4 Invalid color code.
5 Invalid mode.
6-65535 Reserved.
Rockwell Automation Publication 2080-RM001D-EN-E - February 2015
Remote LCD is not physically connected to
the controller (or the wiring is incorrect).
Serial port settings are other than what is
required for the Remote LCD.
Chapter 15
Input/Output instructions
363