Counter Instructions; Chapter 11 - Allen-Bradley Micro800 General Instructions Manual

Counter instructions

Counter instructions are used to control operations based on the number of
events.
Function
CTD on page 268
CTU on page 269
CTUD on page 273
Rockwell Automation Publication 2080-RM001D-EN-E - February 2015
Description
Block counts (integers) from a given value down to 0, 1 by 1.
Counts (integers) from 0 up to a given value, 1 by 1.
Counts (integers) from 0 up to a given value, 1 by 1, or from a given value down to 0 (1 by 1).

Chapter 11

267