Cop - Allen-Bradley Micro800 General Instructions Manual

Chapter 13
Data manipulation instructions

COP

Parameter
Enable
Src
SrcOffset
300
COP copies the binary data in the Source to the Destination, and leaves the
source value unchanged.
Arguments
Parameter type Data type
Input BOOL
Input BOOL
SINT
USINT
BYTE
INT
UINT
WORD
DINT
UDINT
Input UINT
Rockwell Automation Publication 2080-RM001D-EN-E - February 2015
Description
Function block enable. This FB is level triggered.
When Enable=TRUE, perform copy.
When Enable=FALSE, the function block will not be executed.
DWORD Initial element to copy.
REAL If the source or destination is a String data type, the other party
must also be a String data type, or a USINT (UCHAR and BYTE) data
TIME
type. If it is not, a data type mismatch will be reported.
DATE
See also Copying to a different data type
STRING
LWORD
ULINT
LINT
LREAL
Source element offset.
The element offset if the source is an array data type.
Set the offset to 0 if:
• If it is not an array data type, or
• To copy from the first element for an array data type.
on page 304.