Allen-Bradley Micro800 General Instructions Manual page 327

ErrorCode
Parameter
HSCSTS.ErrorCode
Displays the error codes detected by the HSC sub-system.
Error code sub-element HSC counting error
code
Bit 15-8 (high byte)
Bit 7-0 (low byte)
Accumulator
Parameter
HSCApp.Accumulator
Sets the initial accumulator value when the High-Speed Counter starts. When the
HSC is in Counting mode, the Accumulator is automatically updated by the HSC
sub-system to reflect the actual HSC accumulator value.
Rockwell Automation Publication 2080-RM001D-EN-E - February 2015
Data type
BOOL
Error description
0-255 The non-zero value for the high byte indicates that the HSC error is due to the PLS data
setting. The value of the high byte indicates which element of the PLS data triggers the
error.
0x00 No error occurring.
0x01 Invalid HSC counting mode.
0x02 Invalid high preset.
0x03 Invalid overflow.
0x04 Invalid underflow.
0x05 No PLS data.
Data type
DINT
High-Speed Counter (HSC) instructions
HSC mode User program access
0...9 read only
User program access
read/write
Chapter 14
327