Trimpot Id Definition; Trimpot Operation Status Values - Allen-Bradley Micro800 General Instructions Manual

Chapter 15
Input/Output instructions
Output selection

Trimpot ID definition

Status value
0x00
0x01
0x02
0x03
418
Trimpot ID definition
The following table describes the Trimpot ID definition.
Bit
15 - 13
12 - 8
7 - 4
3 - 0

Trimpot operation status values

The following table describes Trimpot operation status values.
Status description
Function block not enabled (no read/write operation).
Read/write operation success.
Read/write operation fails due to an invalid Trimpot ID.
Write operation fails due to an out of range value.
Rockwell Automation Publication 2080-RM001D-EN-E - February 2015
Description
Module type of trimpot:
• 0x00 - Embedded.
• 0x01 - Expansion.
• 0x02 - Plug-in Port.
Slot ID of the module:
• 0x00 - Embedded.
• 0x01-0x1F - ID of Expansion Module.
• 0x01-0x05 - ID of Plug-in Port.
Trimpot type:
• 0x00 - Reserved.
• 0x01 - Digital Trimpot Type 1 (LCD Module 1).
• 0x02 - Mechanical Trimpot Module 1.
Trimpot ID inside the module:
• 0x00-0x0F - Embedded.
• 0x00-0x07 - ID of Trimpot for Expansion.
• 0x00-0x07 - ID of Trimpot for Plug-in Port.
The trimpot ID starts from 0.