Allen-Bradley Micro800 General Instructions Manual page 365

LCD_REM arguments
Parameter Parameter type
Enable Input
Font Input
Line1 Input
Line2 Input
Line3 Input
Line4 Input
Line5 Input
Line6 Input
Line7 Input
Line8 Input
LCD_REM Output
Sts Output
Rockwell Automation Publication 2080-RM001D-EN-E - February 2015
Data Description
type
BOOL Function block enable.
When Enable = TRUE, remote LCD switches to user-defined screen from I/O status screen.
When Enable = FALSE, remote LCD switches back to I/O status screen.
UDINT Value of the startup message font size.
Valid values:
• 0: Default (Large – 8x16)
• 1: Small (8x8)
• 2: Large (8x16)
• 3: Extra Large (16x16)
• 4 onward: Reserved
Remote LCD Size is 192x64 pixels. When large or extra-large font is selected, Remote LCD only
displays Line1 to Line4 strings. Line5 to Line 8 string inputs are ignored in this case.
Remote LCD can display maximum 24 characters per line when small or large font is selected.
For extra large fonts, remote LCD can display maximum 12 characters per line.
String String to be displayed on line 1 of the LCD. Maximum 24 characters.
String String to be displayed on line 2 of the LCD. Maximum 24 characters.
String String to be displayed on line 3 of the LCD. Maximum 24 characters.
String String to be displayed on line 4 of the LCD. Maximum 24 characters.
String String to be displayed on line 5 of the LCD. Maximum 24 characters.
String String to be displayed on line 6 of the LCD. Maximum 24 characters.
String String to be displayed on line 7 of the LCD. Maximum 24 characters.
String String to be displayed on line 8 of the LCD. Maximum 24 characters.
BOOL Function block enable.
When Enable = TRUE, user display is active.
When Enable = FALSE, IO Status/Menu display is active.
UINT Status of the remote LCD operation.
SeeLCD_REM status codes.
Input/Output instructions
on page 368
Chapter 15
365