Allen-Bradley Micro800 General Instructions Manual page 234

Programmable controllers

Hide thumbs Also See for Micro800:

Table of Contents

Communication instructions

Add a contact and a coil

Follow these steps to add a coil and a contact to the MSG_CIPGENERIC

function block, which will be used to convert the catalog information to a human

readable string.

1. In the Toolbox, select Direct Contact and drag and drop it to the left of the

MSG_CIPGENERIC function block input on the first ladder rung.

2. In the Variable Selector, type Get_Catalog in the Name field for the

3. In the Toolbox, select Direct Coil and drag and drop it to the right of the

MSG_CIPGENERIC function block output on the first ladder rung.

4. In the Variable Selector, type Convert_String in the Name field for the

The first rung of your ladder diagram program for MSG_CIPGENERIC

messaging should look similar to the following image.

Rockwell Automation Publication 2080-RM001D-EN-E - February 2015