Cipsymboliccfg Data Type - Allen-Bradley Micro800 General Instructions Manual

Structured Text (ST)

CIPSYMBOLICCFG data type

The following table describes the CIPSYMBOLICCFG data type.
Parameter Data type
Service USINT
Symbol STRING
Count UINT
Type User-defined
Offset USINT
Reserved for future use.
Rockwell Automation Publication 2080-RM001D-EN-E - February 2015
Description
Service code:
• 0 - Read (default)
• 1 - Write
Name of the variable to Read/Write.
• Maximum of 80 characters.
• Field cannot be empty.
See Symbolic Read/Write syntax
Number of variable elements to Read/Write:
• Valid values: 1 - 490
• 1 is used if the value is set to 0.
User-defined data type for the target variable.
See Symbolic data type support on page
Reserved for future use.
A byte offset of Read/Write variable used to Read/Write a large size variable that cannot be processed in one
message.
• 0 – 0xFF
Communication instructions
on page 188.
187.
Chapter 9
187