Doy - Allen-Bradley Micro800 General Instructions Manual

Chapter 23
Timer instructions

DOY

Parameter
EN
TimeA
TimeB
TimeC
TimeD
DOY
634
The DOY function has four channel inputs; it turns on an output if the value of
Real-Time Clock (RTC) is in the range of the Year Time setting of any one of
four channels. If RTC is not present, the output is always off.
DOY operation
Configure any of the Time input parameters with valid ranges as specified in the
DOYDATA Data Type table. If TimeX.Enable is set to TRUE and an RTC is
present and enabled, an invalid value will fault the controller.
Arguments
Parameter Type Data Type
Input BOOL
Input DOYDATA
Input DOYDATA
Input DOYDATA
Input DOYDATA
Output BOOL
Rockwell Automation Publication 2080-RM001D-EN-E - February 2015
Description
Function enable.
When EN = TRUE, perform the function.
When EN = FALSE, do not perform the function.
Year Time Setting of Channel A.
See DOYDATA data type on page 636.
Year Time Setting of Channel B.
See DOYDATA data type on page 636.
Year Time Setting of Channel C.
See DOYDATA data type on page 636.
Year Time Setting of Channel D.
See DOYDATA data type on page 636.
If TRUE, the value of the real-time clock is in the range of the Year Time setting of
any one of the four channels.