Allen-Bradley Micro800 General Instructions Manual page 351

Programmable controllers

Hide thumbs Also See for Micro800:

Table of Contents

5. Select Lock and Logical Value to force the input to the ON position.

To view results

1. Click the Local Variables tab to view variable changes.

2. Expand MyAppData and MyInfo variable list.

3. Turn on the encoder to see the counter count up/down. For example, if the

encoder is attached to a motor shaft, then turn on the motor to trigger the

4. Verify the Logical Value of in the MyStatus variable is 1, which indicates the

HSC is running.

5. View the counter value in MyInfo.Accumulator.

HSC status codes (STS)

Rockwell Automation Publication 2080-RM001D-EN-E - February 2015

High-Speed Counter (HSC) instructions

for the complete list of status