Plugin_Reset - Allen-Bradley Micro800 General Instructions Manual

PLUGIN_RESET

Parameter
Enable
SlotID
Sts
ENO
PLUGIN_RESET resets any Plug-in Generic Module hardware except 2080-
MEMBAK-RTC modules. After the hardware reset, the Plug-in Generic Module
is ready for configuration and operation.
Arguments
Parameter Data type
type
Input BOOL
Input UINT
Output UINT
Output BOOL
PLUGIN_RESET function block language examples
Function Block Diagram (FBD)
Ladder Diagram (LD)
Rockwell Automation Publication 2080-RM001D-EN-E - February 2015
Description
Function block enable.
When Enable = TRUE, execute Plug-in reset.
When Enable = FALSE, there is no reset operation.
Plug-in slot number.
Slot ID = 1,2,3,4,5 (starting with the far left slot = 1).
See PLUGIN_READ status codes on page
Enable out.
Applies only to LD programs.
Chapter 15
Input/Output instructions
398.
399