Allen-Bradley Micro800 General Instructions Manual page 252

Programmable controllers

Hide thumbs Also See for Micro800:

Table of Contents

Communication instructions

Micro830 wiring

This example uses a Micro830 controller with a SERIALISOL module plugged

into the first slot (Channel 5). A single PowerFlex 40 is connected, but the

diagram below shows how to wire for multi-drop. Refer to the user manual for

additional wiring information.

Modbus Read example

The following MSG_MODBUS instruction can be used to read status data from

the PowerFlex 40 drive.

Rockwell Automation Publication 2080-RM001D-EN-E - February 2015