5. In the Toolbox:
•
Double-click Direct Contact to add it to the rung, or
•
Drag and drop a Direct Contact onto the rung.
6. Assign a variable to the direct contact:
•
Double-click on the direct contact to display the Variable Selector,
and then click the I/O - Micro830 tab.
•
Click _IO_EM_DI_05, and then click OK to assign the direct contact
to input 5.
Rockwell Automation Publication 2080-RM001D-EN-E - February 2015
High-Speed Counter (HSC) instructions
Chapter 14
345