Chapter 14
High-Speed Counter (HSC) instructions
348
3. Assign the rest of the values to the MyAppData variables as shown in the
following figure.
•
In the Initial Value field, enter the value.
•
See
HSCAPP data type
description for each value
4. Assign the HSC command value:
•
In the Initial Value field for the MyCommand variable, type 1.
•
See
HSCCmd values
values.
Rockwell Automation Publication 2080-RM001D-EN-E - February 2015
on
page 314
for more information on the
on
page 313
for more information on command