Allen-Bradley Micro800 General Instructions Manual page 301

Parameter Parameter type
Dest Input
DestOffset Input
Length Input
Swap Input
Sts Output
ENO Output
Rockwell Automation Publication 2080-RM001D-EN-E - February 2015
Data type
BOOL DWORD
SINT REAL
USINT TIME
BYTE DATE
INT STRING
UINT LWORD
WORD ULINT
DINT LINT
UDINT
UINT
UINT
BOOL
UINT
BOOL
Data manipulation instructions
Description
Initial element to be overwritten by the source.
Destination element offset.
The element offset if the destination is an array data type.
Set the offset to 0 if:
• If it is not an array data type, or
• To copy from the first element for an array data type.
Number of Destination Elements to copy.
When the destination is a String data type, it indicates the
number of strings to be copied.
TRUE: Swap bytes according to the Data Type.
A swap operation will not occur if:
• The source data type or the destination data type is a String, or
• If both the source and the destination are 1-byte length data.
Status of the copy operation.
See COP operation status values on page 303
Enable out.
Applies only to LD programs.
Chapter 13
301