Allen-Bradley Micro800 General Instructions Manual page 246

Chapter 9
Communication instructions
246
Results
The Local Variables selector should look similar to the following image.
Configure initial values for TargetCfg
1. From the ladder diagram POU, double-click the A_TarCfg variable to open
the global variables selector.
2. Expand the TargetCfg parameter to view additional parameters.
3. Enter the following values in the Initial Value column for each parameter.
Parameter
A_TarCfg.Path
A_TarCfg.CipConnMode
A_TarCfg.UcmmTimeout
A_TarCfg.ConnMsgTimeout
A_TarCfg.ConnClose
Rockwell Automation Publication 2080-RM001D-EN-E - February 2015
Initial value
'4,192.168.1.19'
1
0
0
Leave blank