Allen-Bradley Micro800 General Instructions Manual page 237

Verify correct IP configuration on Controller B
Follow these steps to verify the IP address settings are correct on Controller B.
1. Open the application workspace for the controller:
2. From the Project Organizer, double-click the controller to display it in the
application workspace.
3. In the controller configuration workspace, expand Ethernet in the
controller tree and then click Internet Protocol to display the controller
configuration page.
4. Verify the IP address settings are correct as identified in the following table.
IP configuration option
IP address
Subnet Mask
Gateway address
Rockwell Automation Publication 2080-RM001D-EN-E - February 2015
Communication instructions
Value
192.168.1.19
255.255.255.0
192.168.1.1
Chapter 9
237