Allen-Bradley Micro800 General Instructions Manual page 230

Chapter 9
Communication instructions
230
Configure initial values for variables
Follow these steps to add initial values to the input variables you previously
created and then assign the variables to the correct MSG_CIPGENERIC function
block input parameter.
To configure initial values for the MyCtrlCfg input variable
1. From the Local Variables page, expand MyCtrlCfg to view its parameters.
2. Enter the following values in the Initial Value column for each parameter.
Parameter
MyCtrlCfg.Cancel
MyCtrlCfg.TriggerType
MyCtrlcfg.StrMode
To configure initial values for the MyAppCfg input variable
1. From the Local Variables page, expand MyAppCfg to view its parameters.
2. Enter the following values in the Initial Value column for each parameter.
Parameter
MyAppCfg.Service
MyAppCfg.Class
MyAppCfg.Instance
MyAppCfg.Attribute
Rockwell Automation Publication 2080-RM001D-EN-E - February 2015
Initial value Comments
Leave blank Not needed.
0 We only need to retrieve the catalog number
once.
Leave blank Not needed.
Initial value
14
01
01
07