Countershaft
Disassembly /Inspection/Reassembly
NOTE:
•
Lubricate all parts with ATF before reassembly.
•
Inspect the thrust needle bearings and the needle bearings for galling and rough movement.
•
Before installing the O-rings, wrap the shaft splines with tape to prevent damaging the O-rings.
•
Locknut has left-hand threads.
•
Install the conical spring washer in the direction shown.
REVERSE GEAR
l;UILlA.K
GEAR
COUNTERSHAFT
Check splines for excessive
wear and damage.
Check bearing surface for scoring,
scratches and excessive wear.
LOCKNUT IFLANGE NUTI
23x 1.25mm
103 - 0 - 103 N·m
110.5 - 0 - 10.5 kgl·m.
75.9 - 0 - 75.9 Ibfoltl
Replace.
Left-hand threads
NEEDLE BEARING
HUB
4TH GEAR
2ND GEAR
THRUST NEEDLE
BEARING
3RD GEAR COLLAR
THRUST NEEDLE BEARING
CLUTCH ASSEMBLY
;...~--=,,-O.RINGS
Replace.
CONICAL SPRING
WASHER
Replace.
PARK GEAR
ONE·WAY
ST GEAR
NEEOLE BEARING
1 ST GEAR COLLAR
TRANSMISSION
HUU"'N<i
BEARING
14-205