Torque Converter Housing Bearings; Control Lever Assembly; Countershaft Bearing Replacement - Honda CR-V 1997 Service Manual

Torque Converter Housing
Bearings
Countershaft Bearing Replacement
1. Remove the counte rshaft bearing using the special
tool.
SLIDE HAMMER,
3/S" - 16
' C omm,"' " ' '
'~ <~ , - _ , , - "
_ _
~
)~ ~
; '- 0
c::: \-:::::Y
'2 ~ :~~ ~'
.
~ . ~;.f1:=,~
~~-:.=-;'- ,( -
::c:-
)\(Q
l'~
1 0 '
ADJUSTABLE BEARING
PULLER, 25 - 40 mm
07736 - A01000B
or
01736 - AOloooA
2. Install the ATF guide plate.
CDUNTERSHAFT
BEARING
3. Install a new countershaft bearing in the torque
converter housing.
0-0.03
mm
(0 - 0 .001
in)
CDUNTERSHAFT
BEARING
A TF GUIDE PLATE
14-230
DRIVER
07749 - 0010000
ATTACHMENT,
Control Lever Assembly
Replacement
Check the condition and movement of the control lever
assembly, If the control lever assembly binds or does
not move smoothly, replace it.
1, Remove th e 6 x 1.0 mm bolt and lock washer.
2. Remove the change shaft from the torque converter
housing.
3. Remove the control lever assembly from the control
shatt.
4. Install the new control lever
assembly in the reverse
order of disassembly. until it bottoms in the torque
converter housing ,
CHANGE SHAFT
'O'.-''''Tr
~
~
CONTROL LEVER
LOCK WASHER ASSEMBLY
Repl ace,