Honda CR-V 1997 Service Manual page 601

From page 14-84
1
Replace Shift Co ntrol Sol enoid
Valve Assem bly and Recheck:
1.
Replace the sll itt control
solenoid va lve
AlB
assembly
(see page 14-136).
2. Turn the ignition switch OFF
and reset t he PCM memory by
removing the BACK UP (7 .5 A)
fuse in the under-hood fusel
relay bo x for more than 10
secon ds.
3. Drive the vehicle at over 12
mph (20 km/h) in 1st, 2nd, 3rd ,
and 4th gear for more than 30
seconds in
~
position.
4. Recheck for code P0730 (41).
Does the
aBO
II scan tool
indicate code P0730 or does
NO
I
the
~
indicator light indi-
The system is OK at t his time.
cate code 41?
YES
Replace Unear Sofenoid Assembly
and Recheck:
1. Replace the linear so lenoid
assembly (see page 14-138).
2. Turn the ignition switch OFF
and reset the PCM memory by
removing the BACK UP (7 .5 A)
fuse in the under-hood fusel
relay box for more than 10 sec-
onds .
3. Drive the vehicle at over 12
mph (20 km/h) in 1st, 2nd, 3rd,
and 4th gear for more than 30
seconds in
'[R.
position.
4. Recheck for code P0730 {41 l.
Does the OBD II scan tool
indicate code P0730 or does
NO
I
the
[Q4J
indicator light indi-
The system is OK at t his time.
cate code 41 ?
YES
Replace the transm ission.
14-85