Reassembly - Honda CR-V 1997 Service Manual

Front Driveshafts
Reassembly
Note these items during reassembly:
• Clean the disassembled parts with 50lvent, and dry them thoroughly with compressed air. Do not wash the rubber
parts with solvent.
•
.~ :
Thoroughly pack the inboard and outboard joints and both joint boots with the joint grease included in the
new driveshaft set.
• The '98 Canada model and all '99 - 00 models use a TPE (Thermoplastic Polyester Elastomer) outboard joint boot.
Use the ear clamp type boot band in the outboard boot set.
Grease quantity:
Inboard Joint: All models
120 -130
9
(4.2 - 4.6
oz)
Left inboard joint spline. (AI :
0.5 -1 .0
9
(0.018 - 0.035
ozi
Outboard Joint: '97 model and '98 USA model
130 - 140
9
(4.6 - 4.9
oz)
16-8
'98 Canada model and all '99 - 00 model. 140 -150 9 (4.9 - 5.3 oz)
SPLINES: IAI---cPl:
~
Pack: cavity with grease.
~
DYNAMICDAMPI'R
~
\IIh',"",,,,
DYNAMIC DAMPER BAND
Replace.
EAR CLAMP BAND·'
Replace.
OUTBOARD BOOT (TPEI·'
INBOARD BOOT
---
/ Pack cavity with grease
DOUBLE LOOP BANDS
Replace.
Pack cavity with grease.
OUTBOARD BooT·2
(RUBBERI
Pack cavity with grease.
EAR CLAMP BANO*l
Replace.
__ - _ c.;;;;w
Pack cavity with g rease.
01 I"TR"6A'n JOINT
*1: '98 Canada models, all '99 - 00 models
*2: '97 - 98 mod els (exce pt '98 Canada model)