Table of Contents
Advertisement
Clutch Disc
Removal/Inspection
1.
Remove the clutch disc and special tools.
2.
Inspect the lining of the clutch disc for signs of slip-
ping or oil. If the clutch disc is burned black or oil
soaked, replace it.
3.
Measure the clutch disc thickness.
Standard (New): 8.4 - 9.1 mm (0.33 - 0.36 in)
Service Limit:
6.0 mm (0.24 in)
DISC
If the thickness is less than the service limit, replace
the clutch disc.
12-8
4.
Measure the rivet depth from the lining surface to
the rivets, on both sides.
Standard (New): 1.2 -1.7 mm (0.05 - 0.07 in) min.
Service Limit:
0.2 mm (0.008 in)
CLUTCH DISC
LINING SURFACE
If the rivet depth is less than the service limit,
replace the clutch disc.
Advertisement
Table of Contents
Troubleshooting
