Honda CR-V 1997 Service Manual page 671

The following symptom can be caused
Check these items
by improper repair or assembly
Vehicle creeps in
[ID
position.
• Improper clutch clearance
• Improper gear clearance
Vehicle does not move in
~ , L~,
or
(Q]
One-way (sprag) clutch installed upside down
position .
Transmission locks up in
[!J
position. • Park lever install ed upside down
• Shift fork bolt not instailed
Excessive drag in transmission.
• ATF pump binding and seizure
Use proper tools when replacing the ATF pump gears, and be careful not
to damage the ATF pump when torque down the main va lve body.
• Check that the shift fork bolt is instailed on the shift fork shaft.
Excessive vibration, rpm related.
Torque converter not fully seated in ATF pump
Noise only with wheels moving.
Reverse selector hub installed upside down
Mainshaft oil seal pops out.
• Mainshaft oil seal improperly installed
• Install the mainshaft oi l seal flush with the torque converter housing. If
the mains haft oil seal is installed into the torque converter housing until
it bottoms, it will block the fluid return passage and result in damage.
Various shifting problems. • Springs improperly installed
• Valves improperly installed
Harsh upshift. Check valve balls not installed
(cont'd)
14-155