Transmission Assembly; Reassembly - Honda CR-V 1997 Service Manual

Transmission Assembly
Reassembly
1. Install the differential assembly in the clutch hous-
ing.
DIFFERENTIAL ASSEMBLY
CLUTCH
2.
Install the spring washer and washer with the angle
against the clutch housing as shown .
3.
Tap e the mainshaft splines, insert the mainshaft
and countershaft into the shift forks. and install
them as an assembly.
COUNTERSHAFT
MAINSHAFT
ASSI,MIII::Y
SHIfT FORKS
WASHER
4. '97 - 99 models: Install the reverse idle gear and
reverse gear shaft in the clutch
housing.
'00 model : Install the coller, thrust washer, reverse
idler gear and the reverse gear shaft in
the clutch housing.
REVERSE GEAR SHAfT
'00 model
r ,- .-- ---------,-
REVERS~
J
~
((
l\~)
IDLE?Ej)
- --1P
~
~ h-~ :==
l ___
~ ~
THRUST WASHER
COLLER
NOTE: Install th e reverse gear shaft ('00 model) in
the direction shown.
5. Install the reverse shift holder in the clutch housing
with the 5th/reverse shift piece pin positioned in the
slot of the reverse shift fork.
6JC 1.0mm
15 N-m 11 .5 kgf·m,lllbf.ftl
(conl'd)
13-67