Table of Contents
Advertisement
Linear Solenoid Assembly
Test
1.
Disconnect the
linear solenoid connector.
LINEAR SOLENOID
CONNECTOR
LINEAR SOLENOID
male terminals
1
i~
':-';
r--
'~-DI
2.
Measure
the
resistance between the No
,
1 and the
No.
2 terminals.
STANDARD: About 5.0
[J
3.
If the resistance is out of
specification,
replace the
linear
solenoid assembly.
4.
Connect the No. 1 terminal of the
connector
to the
battery positive terminal and the
No.
2 terminal to
the
battery
negative terminal. A
clicking sound
should be heard.
5.
If
a
clicking
sound is
not heard, remove the linear
solenoid assembly.
6.
Check the linear
solenoid fluid passage
for dust or
dirt.
7.
8.
Connect the No.1 terminal of the connector to the
battery positive terminal and the No.2 terminal to
the battery negative terminal. Make
sure
that the
valve moves.
Disconnect the
negative
battery terminal, and make
sure the valve
releases. You can see valve
move-
ment
through
the
fluid
passage
in the mounting
surface of
the linear
solenoid
assembly.
LINEAR SOLENOID
VALVE
9.
If the valve binds,
or
moves
sluggishly,
or if the linear
solenoid does not
operate,
replace the linear solenoid
assembly.
14-137
Advertisement
Table of Contents
Troubleshooting
