Table of Contents
Advertisement
Rear Suspension
Hub Bearing Unit Replacement
Note these items during replacement:
•
Use only genuine Honda wheel weights for aluminum wheels. Non-genuine wheel weights may corrode and damage
the aluminum wheels.
•
Before installing the brake drum, clean the mating surfaces ofthe rear hub and the brake drum.
•
Before installing the wheel, clean the mating surfaces of the brake drum and wheel.
FLANGE BOLT
12
x
1.25
mm
103 N'm 110.5 kgf·m,
761bf.ft)
O-RING
Replace.
BACKING PLATE
TRAILING ARM
Check for cracking
and damage.
HUB BEARING UNIT
Replace.
16-20
FLANGE BOLT
10
x 1.25 mm
64 N·m 16.5 kgf·m, 47 IbHt)
HUB
SPINDLE NUT
22x1.5mm
181 N'm 118.5 kgf·m, 134 Ibf.ft)
Replace.
NOTE: After tightening, use a drift
punch to lock the spindle nut shoulder
into the spindle.
BRAKE SHOE
Check for cracking
and damage.
BRAKE DRUM
Check for wear
and damage
.
WHEEL NUT
12 x 1.5 mm
108 N·m 111.0 kg/·m, 80 Ibf.ft)
Advertisement
Table of Contents
Troubleshooting
