Countershaft Bearing; Replacement - Honda Prelude 1993 Service Manual

Countershaft Bearing
Replacement
1. Remove the retaining plate from the clutch housing.
Remove the needle bearing with the special tool,
then remove the oil guide plate.
3/8 in x 16 throad/in SLIDE HAMMER
(Commc.cially rvailrblel
ADJUSTAB1I BEARING
PULLER, 25 - i(, mm
0t736 - A01@0A
NEEDl-E
NEEDLE BEARING
1 3 - 3 3
OIL HOLES
Position the oil guide plate and new needle bearing
in the bore of the clutch housing.
NOTE: Position the needle bearing with the oil hole
facing up.
NEEDLE BEARING
Drive the needle bearing in using the special tools
as shown.
DRIVER
07749 - (xll(xx)O
(cont'd)