22. Turn the select lever and shift arm shaft counter·
cl
ockwise,
then insert the shift arm
shaft.
SELECT ARM
23.
Align the shift arm A groove and select arm finger
by turn the shift arm shaft and select lever clock·
wise,
th en install the shift arm shaft
assembly.
24. Apply liquid gasket
(PI
N 08718 - 0001 or 08718 -
00031 to the
threads,
then install the interlock bolt.
25.
Apply liquid gasket to the surface
of
the shift arm
cover as
shown.
Note these
items:
• Use liquid gasket (PIN 08718 - 0001 or 08718 -
00031.
•
Remove the dirty oil from the sealing
surface.
• Seal the entire circumference of the bolt holes to
prevent oil
leakage.
•
If 20
minutes
have passed after applying liquid
gasket,
reapply it and assemble the
housings.
• Allow it to cure at least 20 minutes after assem-
bly before filling the transmission with
MTF.
26. Install the shift arm cover assembly.
SHIFT ARM COVER ASSEMBLY
10 x 12 mm DOWEL PIN
8x1 .25mm
27 N·m 12.8 kgf·m. 20 IbHtl
27.
Install the transfer
assembly.
NOTE: Lubricate MTF to the O-ring and contact
areas.
DOWELPfN
TR.AN'SA;'R ASSEMBLY
10x
mm
44
N'm
14.5
kgf·m.
331bf.ftl
13-71