Honda CR-V 1997 Service Manual page 529

4th Gear
((Q;i
or
[QJ
position)
1. Hydraulic pressure is applied to the 4th clutch, which rotates together with the mainshaft, and the mainshaft 4th gear
rotates.
2. Power is transmitted to the countershaft 4th gear, which drives the countershaft.
3. Power is transmitted to the final drive gear, which drives the final driven gear and the transfer shaft drive gear (4WD).
4. The transfer shaft drive gear drives the transfer shaft and the transfer driven gear shaft (4WD).
NOTE:
• Hydraulic pressure is also applied to the 1st clutch, but since the rotation speed of 4th gear exceeds that of 1st gear,
power from 1st gear is cut off at the one-way clutch .
• The illustration shows the 4WD automatic transmission; power flow of the 2WD automatic transmission is identical
to the 4WD except for parts related to the transfer assembly.
TORQUE CONVERTER
RNALDRIVE
GEAR
MA.INSHA,I'T 4TH GEAR
4TH CLI.JTC:H
4TH GEAR
DRIVEN GEAR
TRANSfeR SHAFT DRIVE GEAR 14WD)
TRANSfeR SHAFT 14WD)
RE'VEIISE SELECTOR HUB
(cont'd)
14-13