Honda CR-V 1997 Service Manual page 546

Description
Hydraulic Flow (cont'd)
00
Position
As the engine turns, the ATF pump starts to operate. Automatic transmission fluid (ATF) is drawn from (99) and dis-
charged into (1). Then, ATF flowing from the ATF pump becomes line pressure (1), Line pressure (1) is regulated by the
regulator valve . Torque converter inlet pressure (92) enters (94) of the torque converter through the lock-up shift valve and
discharges into (gO) . The torque converter check valve prevents torque converter pressure from rising. Under this condi-
tion, hydraulic pressure is not applied to the clutches.
NOTE:
• When used, "'eft" or "right" indicates direction on the hydraulic circuit .
• The hydraulic circuit shows the '97 - 98 models 17 positions); the '99 - 00 models 16 positions) is similar .
. .1..
r.,_
14-30