Honda CR-V 1997 Service Manual page 1027

Interior Trim
Carpet Replacement (cont'd)
5. Remove the center lower cover (MIT model).
t> ; Clip locations. 2
6. Remove the SRS unit covers.
t>: Clip locations, 2
SRS UNIT
CENTER LOWER
COVER
FASTENER
('98 - 00 models)
SRS UNIT
COVER
7. '97 model : Cut areas
®
and
@
in the carpet, then
pull the carpet back,
'98 - 00 models: Release the fastener and cut area
@ in the carpet, then pull the carpet back.
20-46
8. Remove the clips, and release the fasteners, then
remove the carpet.
NOTE: Take care not to damage, wrinkle or twist the
carpet.
t>: Clip locations. 3
SEAT
HARNESS
9, Installation is the reverse of the removal procedure.
NOTE:
• Take care not to damage, wrinkle or twist the
carpet.
• Make sure the seat harness is routed correctly.
• If necessary, replace any damaged clips.
• Reattach the cut areas
®
and
@
('97 model) or
cut area
@
('98 - 00 models) in the carpet with
wire ties.