Honda CR-V 1997 Service Manual page 727

Disassembly IReassembly
1. Remove the ATF guide cap by pushing the sub-shaft
inside the transmission housing.
2. Remove the 1st-hold clutch assembly by pulling,
then removing the sub-shaft.
3. Install new O-rings on the sub-shaft.
NOTE: Wrap the shaft splines with tape to prevent
damaging the O-rings.
4. Place the sub-shaft in the transmission housing,
and install the 1st-hold clutch assembly.
5. Install the new ATF guide cap using the special
tools . Install it in the direction shown.
1ST-HOLD CLUTCH
ASSEMBLY
DRIVER
07749 - 0010000
ATF GUIDE CAP
ATTACHMENT,
32x35mm
07746 - 0010100
14-211