Honda CR-V 1997 Service Manual page 911

27. Separate the hub from the knuckle using the special
tool and a hydraulic press. Take care not to distort
the splash guard. Hold on to the hub to keep it from
falling when pressed clear.
HUB DIS/ASSEMBLV TOOL
07GAF - SE001 00
FRONT HUB
Press
SETTING
POINT
28. Remove the circlip and the splash guard from the
knuckle.
SPLASH GUARD
Check for bending and damage.
29. Press the wheel bearing out of the knuckle using the
special tools and a press.
Press
DRIVER
07749 - 0010000
DRIVER
ATTACHMENT.
62x64mm
07947 - 6340400
BEARING
Replace.
30. Press the wheel bearing inner race from the hub
using the special tool, a bearing separator, and a
press.
HUB DIS/ ASSEMBL V TOOL
07GAF- 00
Press
BEARING
SEPARATOR
(cont'd)
18-13