Honda CR-V 1997 Service Manual page 897

Power Steering Gearbox
Installation (cont'd)
8. Install the left front mount. Tighten the mounting
bolts in order: A and B.
LEFT FRONT MOUNT
A·1D x 1.25 mm
44N·m
IU
kgl·m, 33
Ibf.ftl
9. Install the right front mount. Tighten the mounting
bolts in order:
A
and
B.
A·1D x 1.25 mm
«N'm
(4.5 kgl'fll, 33
Ibf.ttl
10. Remove the vinyl type from the side frame (both
sides).
17-52
11. Install the return hose joint by tightening the 16 mm
flare nut.
ADJUSTABLE HOSE ClAMP
(For installation
refer to page 17·23)
\
)
RETURN HOSE JOINT:
16 mm RARE NUT
28N·m
12.9 kgl'm, 21
Ibf.ftl
HOSE:
14 mm FLARE NUT
37N'm
(3.8 kgf·m.
271bf.ltl
12. Connect the return hose securely, and tighten the
adjustable hose clamp.
13. Connect the pump outlet hose, and tighten the 14
mm flare nut.
NOTE: Make sure that there is no interference
between the fluid lines, the rear beam or any other
parts.