Honda CR-V 1997 Service Manual page 600

Electrical Troubleshooting ('97 Model)
Troubleshooting Flowchart - Shift Control System
• OBO II Scan Tool indicates Code
Possible Cause
P0730.
Faulty shift control system
• Self-diagnosis
lQ.~
indicator
light indicates Code 41.
Check and record the freeze data
in case it is needed later for prob-
lem verification.
Check for Another Code:
Check whether the OBO II scan
tool or the
llliJ
indicator light
indicates another code.
Perform the Troubleshooting
Flowchart for the indicated
Does the aBO II scan tool or
YES
Codels). Do not continue with
the
[lli]
indicator light indi-
this troubleshooting until the
cate another code? causes of any other oTCs have
been corrected. Recheck for code
NO'
pono
(41)
after
troubleshooting.
*
Even
if
you cannot reproduce code
Test 1st. 2nd. 3rd. and 4th Clutch
P0730. test-drive the vehicle. test the
Pressure:
clutch pressures, and if necessary ,
Measure t he 1st. 2nd, 3rd, and
replace the shift control solenoid valve
4th clutch pressure (see page 14-
assembly.
161 thru 14-163).
Is each clutch pressure within
NO
Repair the hydraulic system as
the service limit?
necessary (see page 14-162 and
14-1631.
I
YES
To page 14-85
14-84