Honda CR-V 1997 Service Manual page 733

CAUTION: If either end of the special tool is set over an
area of the spring retainer which is unsupported by the
return spring. the retainer may be damaged. Be sure the
special tool is adjusted to have full contact with the
spring retainer.
SPECIAL TOOl
SPRING RETAINER
4. Compress the return spring.
5. Remove the snap ring . Then remove the special tools,
spring retainer and return spring.
SNAP RING
RETURN SPRING
SPRING RETAINER
6. Wrap a shop rag around the clutch drum. and apply
air pressure to the ATF passage to remove the pis·
ton.
Place a finger tip on the other end while applying
air pressure.
CLUTCH
DRUM
PISTON
OSHA-APPROVED
30 psi NOZZLE
14-217