Honda CR-V 1997 Service Manual page 454

7. Remove the set ball screws, washers, springs, steel
balls, and back-up light switch.
WASHER
Replace.
1
STEEL BALL
D.5/1Sin
L.
26.1 mm
(1 .03 in.)
WASHER
BACK-UP LIGHT SWITCH
8. Remove the flange bolt, drain plug, and filler plug .
AUERPLUG
\
DRAIN PLUG
WASHER
Replace.
WASHER
Replace .
FLANGE BOLT
9. Remove the transmission housing mounting bolts
in a crisscross pattern in several steps.
TRANSMISSION HOUSING
MOUNTING BOLT
10. Remove the 32 mm sealing bolt.
32
mm
SEALING BOLT
TRANSMISSION
HOUSING
DOWEL PINS
SNAP RING PUER
CLUTCH HOUSIN~
11. Expand the snap ring on the countershaft ball bear-
ing, and remove it from the groove using a pair of
snap ring plier.
12. Separate the transmission housing from the clutch
housing.
13. Remove the dowel pins, and wipe it clean of the
sealant.
Icont'd)
13-15