Subaru IMPREZA 2002 Service Manual page 312

STARTER
STARTING/CHARGING SYSTEMS
5 ) Remove packing A, three planetary gears, pack-
ing 6 and plate.
(A) PackingA
(B) Planetary gear
(C) Plate
(D) Packing B
6) Remove the shaft assembly and overrunning
clutch as a unit.
CAUTION:
Record the direction of the lever before remov-
ing.
S6M0398A
I
(A) Shaft ASSY
(B) Overrunning clutch
(C) Lever
7) Remove the overrunning clutch from shaft as-
sembly as follows:
(1) Remove the stopper from ring by lightly tap-
ping a fit tool placed on stopper.
(2) Remove the ring, stopper and clutch from
shaft.
(A)'
I
S6M0399A
I
(A) Stopper
(B) Tool
(C) Ring
(D) Shaft
2. BRUSH HOLDER
Slightly open the metal fitting holding the insulating
plate to the brush holder. Remove the insulating
plate.
NOTE:
The brush and spring can be easily removed from
the brush holder at this time.
(A) Brush holder
(B) Insulating plate
(C) Metal fitting
SC-8