Subaru IMPREZA 2002 Service Manual page 88

VE
EMISSION CONTROL
(AUX.
EMISSION CONTROL
YT VALVE
IEVICES)
12.Vent Valve
A: REMOVAL
1) Remove the fuel tank. <Ref. to FU(S0HC)-51,
REMOVAL, Fuel Tank.>
2) Remove the protector cover.
EN1 050
3) Remove the clips, and disconnect the hoses
from vent valve.
5
4) Remove the nuts which install the vent valve on
fuel tank.
B: INSTALLATION
Install in the reverse order of removal.
CAUTION:
Replace the rubber seat with a new one.
Tightening torque:
T: 4.4 Nom (0.45 kgf-m, 3.3 fl-lb)
U I
,-Rubber seat
02M1794A
C: INSPECTION
Make sure the hoses are not cracked or loose.
EC(S0HC)-14