Subaru IMPREZA 2002 Service Manual page 87

DRAIN FILTER
EMISSION CONTROL
(AUX.
EMISSION CONTROL DEVICES)
11 .Drain Filter
A: REMOVAL
1) Disconnect the ground terminal from battery.
2) Lift-up the vehicle.
3) Remove the canister. <Ref. to EC(S0HC)-5,
REMOVAL, Canister.>
4) Disconnect the connector from drain valve.
/
H2M3611 0
5) Disconnect the evaporation hoses (A) from joint
pipes.
6) Remove the bolt which installs the drain filter and
drain valve brackets on body, and remove them as
a unit.
7) Disconnect the evaporation hoses, and remove
the drain filter.
B2M1791C
B: INSTALLATION
Install in the reverse order of removal.
Tightening torque:
23 N-m (2.35 kgf-m, 17.0 it-lb)
C: INSPECTION
1) Make sure all hoses are installed correctly.
2) Make sure the hoses are not cracked or loose.
EC(S0HC)-13