Camshaft - Subaru IMPREZA 2002 Service Manual

CAMSHAFT
MECHANICAL
19.Camshaft
A: REMOVAL
1) Remove the V-belt. <Ref. to ME(S0HC)-43, IN-
STALLATION, V- belt. >
2) Remove the crankshaft pulley. <Ref. to ME(S0-
HC)-45, REMOVAL, Crankshaft Pulley.>
3) Remove the belt cover. <Ref. to ME(S0HC)-46,
REMOVAL, Belt Cover.>
4) Remove the timing belt assembly. <Ref. to
ME(S0HC)-47, REMOVAL, Timing Belt Assem-
bly.>
5) Remove the camshaft sprocket. <Ref. to
ME(S0HC)-52, REMOVAL, Camshaft Sprocket.>
6) Remove the crankshaft sprocket. <Ref. to
ME( S0HC)-54, REM OVAL, Crankshaft Sprocket. >
7) Remove the belt cover No. 2 (RH).
8) Remove the tensioner bracket.
H2M2380
9) Remove the belt cover No. 2 (LH).
CAUTION:
Do not damage or lose the seal rubber when re-
moving the belt covers.
I O ) Remove the camshaft position sensor support.
(LH side only)
11) Remove the oil level gauge guide. (LH side
only)
.
12) Remove the valve rocker assembly. <Ref. to
ME(S0HC)-55, REMOVAL, Valve Rocker Assem-
bly.>
13) Remove the camshaft cap.
(1) Remove the bolts (a) through (b) in alpha-
betical sequence.
I
B2M2612E
(2) Equally loosen the bolts (c) through (j) all the
way in alphabetical sequence.
I
B2M2612C
(3) Remove the bolts (k) through (p) in alpha-
betical sequence using ST.
ST 499497000 TORX PLUS
(4) Remove the camshaft cap.
B2M2613
14) Remove the camshaft.
15) Remove the oil seal.
M E(S0HC)-57