Subaru IMPREZA 2002 Service Manual page 26

INTAKE MANIFOLD
FUEL INJECTION (FUEL SYSTEMS)
7 ) Install the fuel injectors.
NOTE:
Always use new O-rings.
(A) O-ring
(B) Fuel injector
NOTE:
Do not forget to install the fuel injector securing clip.
I
B2M3488
8) Tighten the bolt which installs the injector pipe
on the intake manifold.
Tightening torque:
4.9 N-m (0.5 kgf-m, 3.6 ft-lb)
Tightening torque:
19 N.m (1.9 kgf-m, 13.7 ft-lb)
9) Tighten the two bolts which install the fuel pipes
on the left side of intake manifold.
Tightening torque:
4.9 N-m (0.5 kgf-m, 3.6 ft-lb)
10) Tighten the bolt which install the injector pipe
on the intake manifold.
Tightening torque:
4.9 N-m (0.5 kgf-m, 3.6 ft-lb)
FU(S0HC)-24