CANISTER
~
EMISSION CONTROL
(AUX.
EMISSION CONTROL DEVICES)
4. Canister
B: INSTALLATION
A: REMOVAL
1) Lift-up the vehicle.
2) Loosen the two clamps which hold two canister
hoses, and disconnect the evaporation hose from
canister.
Install in the reverse order of removal.
Tightening torque:
23
N-m (2.3 kgf-m,
17 ff-lb)
3) Remove the canister from body.
C: INSPECTION
Make sure the canister and canister hoses are not
cracked or loose.
EC(S0HC)-5