IGNITION
GENERAL DESCRIPTION
9: COMPONENT
S6M0329E
(1)
Spark plug
(4)
Spark plug cord
(#2,
#4)
Tightening torque: N.m (kgf-m,
ft-lb)
(2)
Spark plug cord
(#1, #3)
T1:
21 (2.1, 15)
( 3 )
Ignition
coil
and ignitor ASSY
T2:
6.4 (0.65, 4.7)
C: CAUTION
Be careful not to burn your hands, because each
Wear working clothing, including a cap, protec-
tive goggles, and protective shoes during opera-
part on the vehicle is hot after running.
Be sure to tighten fasteners including bolts and
nuts to the specified torque.
tion.
Remove contamination including dirt and corro-
sion before removal, installation or disassembly.
tect them from dust or dirt.
Before removal, installation or disassembly, be
Place shop jacks or safety stands at the specified
points.
sensors or units, be sure to disconnect the negative
terminal from battery.
Keep the disassembled parts in order and pro-
Before disconnecting electrical COnneCtOrS
Of
sure to clarify the failure. Avoid unnecessary re-
moval, installation, disassembly, and replacement.
IG(S0HC)S