Subaru IMPREZA 2002 Service Manual page 317

G EN ERATOR
STARTING/CHARGING SYSTEMS
3. Generator
A: REMOVAL
1) Disconnect the ground terminal from battery.
2) Disconnect the connector and terminal from gen-
erator.
Non-Turbo Model
I
B2M3105
I
Turbo Model
3) Remove the V-belt cover.
Non-Turbo Model
B2M3106
Turbo Model
EN0048
4) Remove the front side V-belt.
<Ref. to ME(S0HC)-43, FRONT SIDE BELT, RE-
MOVAL, V-belt.> or <Ref. to ME(D0HC TURBO)-
44, FRONT SIDE BELT, REMOVAL, V-belt.>
5) Remove the bolts which install the generator
onto bracket
.
B: INSTALLATION
Install in the reverse order of removal.
CAUTION:
Check and adjust the V-belt tension. <Ref. to
ME(S0HC)-44, INSPECTION, V-belt.> and <Ref.
to ME(D0HC TURBO)-45, INSPECTION, V-belt.>
SC-13