FUEL INJECTION (FUEL SYSTEMS)
FUEL INJECTOR
12) Remove the bolt which holds the injector pipe
to the intake manifold.
13) Remove the bolt which holds the fuel pipe on
the left side intake manifold.
14) Remove the fuel injector from the intake mani-
fold.
(1) Remove the fuel injector securing clip.
(2) Remove the fuel injector while lifting up the
fuel injector pipe.
B: INSTALLATION
1. RH SIDE
Install in the reverse order of removal.
CAUTION:
Replace O-rings with new ones.
(A) O-ring
(B) Fuel injector
Tightening torque:
4.9 N.m (0.5 kgf-m, 3.6 ff-lb)
FU(SOHC)-41