Subaru IMPREZA 2002 Service Manual page 237

COOLING
WATER PUMP
3) Install the left-hand belt cover No. 2.
Tightening torque:
5 N-m (0.5 kgf-m, 3.6 ff-16)
4) Install the left-hand camshaft sprockets by using --.-
SI.
ST 49927071 00 CAMSHAFT SPROCKET
Tightening torque:
WRENCH
78 N m (8.0 kgf-m, 57.9 ff-lb)
5) Install the belt idler No. 2.
Tightening torque:
39 N.m (4.0 kgf-m, 28.9 ff-lb)
6) Install the automatic belt tension adjuster which
tension rod is holded with pin. <Ref. to ME(S0HC)-
SEMBLY AND BELT IDLER, INSTALLATION,
Timing Belt Assembly.>
7) Install the timing belt. <Ref. to ME(S0HC)-49,
TIMING BELT, INSTALLATION, Timing Belt As-
sembly.>
48, AUTOMATIC BELT TENSION ADJUSTER AS-
8) Install V-belts. <Ref. to ME(S0HC)-43, INSTAL-
LATION, V-belt.>
9) Install the radiator main fan and sub fan motor
assemblies. <Ref. to CO-47, INSTALLATION, Ra-
diator Main Fan and Fan Motor.> and <Ref. to CO-
48, INSTALLATION, Radiator Sub Fan and Fan
Motor.>
10) Install the reservoir tank.
11) Connect the over flow hose.
12) Install the air intake duct.
13) Lift-up the vehicle.
CO-31