Subaru IMPREZA 2002 Service Manual page 254

RADIATOR SUB FAN AND FAN MOTOR
COOLING
10.Radiator Sub Fan and Fan
Motor
A: REMOVAL
1) Disconnect the battery ground cable.
2) Lift-up the vehicle.
3) Remove the under cover.
4) Remove the radiator under cover.
5) Disconnect the connector of sub fan motor.
6) Lower the vehicle.
7) Remove the air intake duct. (Turbo model)
10) Remove the radiator sub fan shroud through
the under side of vehicle.
B: INSTALLATION
Install in the reverse order of removal.
Tightening torque:
4.9 N.m (0.50 kgf-m, 3.6 ft-16)
8 ) Remove the bolts which hold sub fan shroud to
the radiator.
9) Remove the over flow pipe. (Turbo model)
CO-48